Failure analysis of pouch-type Li–O2 batteries with superior energy density

Li–O2 batteries have attracted significant interest in the past decade owing to their superior high specific energy density in contrast to conventional lithium ion batteries.An 8.7-Ah Li–O2 pouch cell with768.5 Wh kg^-1 was fabricated and characterized in this investigation and the factors that influenced the electrochemical performance of the Li–O2 pouch cell were studied.In contrast to coin/Swagelok-type Li–O2 cells,it was demonstrated that the high-loading air electrode,pulverization of the Li anode,and the large-scale inhomogeneity of the large pouch cell are the major reasons for the failure of Li–O2 batteries with Ah capacities.In addition,safety tests of large Li–O2 pouch cells were conducted for the first time,including nail penetration,crushing,and thermal stability.It was indicated that a self-limiting mechanism is a key safety feature of these batteries,even when shorted.In this study,Li–O2 batteries were investigated in a new size and capacity-scale,which may provide useful insight into the development of practical pouch-type Li–O2 batteries.     

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

一种基于苯并噻二唑衍生物的F~-荧光探针分子的理论研究

用密度泛函理论研究了最近实验上合成的一种基于苯并噻二唑衍生物的F~-荧光探针(1)的性质.通过对相关化学反应热力学参数的计算,提出了1对F~-具有高选择性的可能原因;同时用含时密度泛函理论对电子吸收光谱和荧光发射光谱进行了理论计算,解释了实验光谱.     

(3S,4S)-4-氨基-3-羟基-6-甲基庚酸的合成

价廉易得的L-亮氨酸先以苄基同时保护氨基及羧基得(S)-2-(二苄胺基)-4-甲基戊酸苄酯,进而在碱性条件下与乙腈发生亲核取代反应得(S)-4-(二苄胺基)-6-甲基-3-氧代庚腈,再经硼氢化钠选择性还原羰基得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚腈,用双氧水氧化得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚酸,最后在Pd(OH)2/C-H2作用下脱掉苄基得到(3S,4S)-4-氨基-3-羟基-6-甲基庚酸,即(3S,4S)-statine。整个合成路线总产率为33.6%。     

HL-2M托卡马克装置低温液氦系统的初步设计

根据中国核聚变研究的发展需要,核工业西南物理研究院正在建造HL-2M托卡马克装置作为等离子体物理和受控聚变工程技术研究的实验平台。依计划,HL-2M装置将采用低温液氦系统为三台中性束低温泵、两台环形低温泵以及一套电子回旋共振加热系统提供共500W@4.5K的冷却。该低温系统由氦液化车间,氦回收纯化循环系统和低温用户的供给分配系统三部分组成,将兼顾超临界氦冷却模式和迫流冷却两种模式。由于每个用户都有特殊的工作要求,除电子回旋共振加热系统外,该系统为每个用户配置了独立的复合传输管线和低温分配阀箱,以减少用户间的互相干涉,确保低温用户安全稳定的运行。文中对此低温系统进行了分析研究并作出初步设计。     

硼原子掺杂对碳纳米管吸附Ne原子影响的第一性原理计算

采用基于第一性原理的密度泛函理论（DFT）和局域密度近似（LDA）方法，优化计算得到碳纳米管（CNT），硼原子取代碳原子及其吸附氖原子前后系统的几何结构，能量，电子能带和态密度。结果显示，碳纳米管的能带结构与石墨的层状几何结构相似，能量的变化只在kz=0和kz=0.5平面之间沿着c轴方向出现。B原子取代C原子使价带和导带分别分裂为两个和三个能带。对Ne原子的吸附使价带能量沿着c轴方向升高并导致Fermi面附近的态密度下降。Ne原子的吸附在谷位H最稳定，顶位A其次。C-C间σ键的弯曲使Ne原子吸附在桥位b1比桥位b2处更为稳定。Ne原子在管外的吸附均为放热过程，而管内则为吸热过程。结构分析表明Ne原子对C原子有排斥作用，对B原子却具有吸引作用。B原子取代C原子的位置略凸出于CNT的管壁之外，使Ne原子的吸附能增加。     

零气耗空气除湿实验研究

针对有热再生式压缩空气除湿装置在再生及冷吹过程中产生气耗的缺点,运用喷射器及恒压变温吸附再生原理设计了一种零气耗空气除湿工艺流程。在搭建小型实验台的基础上,通过改变喷射器引射率进行实验研究三种工况条件下活性氧化铝的吸附再生性能。实验结果表明:实验全过程能够保持一个相对稳定且有效的恒压变温吸附再生条件,且出口空气露点达到生产要求;随着喷射率的降低,吸附剂再生效果逐渐下降,而吸附效果逐渐上升。引射率为0.5时的再生时间约为引射率0.75的1.85倍,再生速率约为0.51倍。而引射率0.33,引射率0.5的吸附效率分别为引射率0.75的1.04倍,1.11倍,吸附稳定时间1.11倍,2.22倍。     

Ni–Al composite hydroxides fabricated by cation–anion double hydrolysis method for high-performance supercapacitor

Chemical doping of nickel hydroxide with other cations(e.g. Al~(3+)) is an efficient way to enhance its electrochemical capacitive performances. Herein, a simple cation–anion(Ni~(2+)and AlO_2) double hydrolysis method was developed toward the synthesis of nickel–aluminum(Ni–Al) composite hydroxides. The obtained composite hydroxides possesses a porous structure, large surface area(121 m~2/g) and homogeneous element distribution. The electrochemical test shows that the obtained composite hydroxides exhibits a superior supercapacitive performances(specific capacitance of 1670F/g and rate capability of 87% from 0.5 A/g to 20 A/g) to doping-free nickel hydroxide(specific capacitance of 1227 F/g and rate capability of 47% from 0.5 A/g to 20 A/g). Moreover, the galvanostatic charge/discharge test displays that after 2000 cycles at large current density of 10 A/g, the composite hydroxides achieves a high capacitance retention of 98%, indicative of an excellent electrochemical cycleability.     

基于灰色关联分析的煤矸石集料级配影响因素研究

为了对煤矸石集料级配作用进行深入研究,采取煤矸石集料空隙率作为评价指标.试验采用粒径0.16~26.5mm的集料,采用最大密度曲线公式确定煤矸石集料的颗粒级配范围,通过调整最大密度曲线n值,确定集料中各粒径组的比例,结合集料的空隙率,运用灰色关联分析各粒径组比例对集料空隙率的影响.研究结果表明:煤矸石粗集料对空隙率的影响大于煤矸石细集料的影响,当n=0.56时,煤矸石集料的空隙率最小,粗集料的骨架作用和细集料的支承作用最好.     

Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.